Lesson 1 · First day at the flying club
First day at the flying club: a cold, silent Cessna 172 waits at the parking, and your instructor hands you the keys. No takeoff today, but the foundation of everything that follows: waking the aircraft up in the right order, forgetting nothing, and bringing it to the runway. He is waiting for you at the holding point, curious to see how you treat your first aircraft.
Mission briefing
You start on the ground at your airport’s parking, in a Cessna 172 SP with the engine off and a cold cockpit. Run the Cockpit and Before start checklists: parking brake set, master ON, fuel BOTH, mixture rich, beacon on, then key to START. Once the engine runs, finish the Engine start checklist.
Before moving, complete the Before taxi checklist: flaps up, taxi light on, brake released. Taxiing before it is done counts as a fault. Then taxi to the holding point of the runway in use without ever exceeding 15 kt, and come to a full stop. There, brake set, run the Before takeoff checklist: run-up at 1700 RPM, magneto check, throttle back to idle, lights, transponder ALT. Tip: when taxiing, use just enough power to roll and keep your feet ready on the brakes; 15 kt is the pace of a fast bicycle, so watch the speed shown on the map.