Lesson 3 · Bringing the aircraft home

The session is coming to an end: you are at the holding point, engine still running, and the parking is not far away. A flight does not end when the wheels touch, and your instructor also judges a pilot by how they hand the aircraft back. Tomorrow morning another student will take this Cessna: it is up to you to leave it spotless.

Mission briefing

You start on the ground in a Cessna 172 SP, stopped at the holding point of the runway in use, engine running. Your goal: reach the parking spot shown on the map and come to a complete stop there, groundspeed below 1 kt. Follow the route drawn on the map and never exceed 15 kt while taxiing: on the ground the aircraft brakes poorly and turns with difficulty, and every excess is counted as a fault.

Once stopped, run the Shutdown checklist in order, from the most fragile to the most essential: parking brake set, avionics OFF, electrical equipment off, mixture to cutoff to stop the engine, magnetos OFF, master OFF, and finally the beacon, which warns until the very end that the propeller may still be turning. Tip: taxi with just enough power to roll, bring the throttle to idle well before the spot so you arrive slowly, and brake gently and evenly on both sides.

Training