Lesson 6 · The final, no safety net

No circuit today: your instructor drops you straight onto final, already airborne, facing the runway in use. The stabilised final and the touchdown are entirely yours, without a word from him. It is the moment every pilot wants to nail, the one people applaud when it is perfect.

Mission briefing

You start in the air, on final 3 NM from the runway in use, flying a Cessna 172 SP with the engine running. Run the Before landing checklist straight away: mixture rich, then flaps in stages. Flaps at 20° or more only come out below 85 kt: slow down first, then lower them.

Stabilise the final: runway centreline, steady slope and constant speed, aiming for 65 kt on short final. Never go below 55 kt while airborne. Over the threshold, reduce power and gently raise the nose for the flare: touchdown must be below 600 ft/min, otherwise it is a hard landing. Once on the ground, brake to a full stop, then run the After landing checklist: flaps up, strobes and landing light off, transponder STBY. Finally, shut the engine down with the Shutdown checklist, in order, from the most fragile to the most essential: parking brake set, avionics OFF, electrical equipment off, mixture to cutoff to stop the engine, magnetos OFF, master OFF, and finally the beacon, which warns until the very end that the propeller may still be turning. Tip: correct with small inputs, power for the slope and pitch for the speed; a final stabilised early makes the landing almost easy.

Training